Our offers are intended exclusively for business customers and legal entities. Sales to consumers as defined by the Austrian Consumer Protection Act (KSchG) are excluded.

Custom book cradles: the KLIO book cradle configurator

The KLIO book cradle is a custom-made book support cut from a single sheet of metal and bent to the dimensions of your book.

You enter the measurements, the configurator calculates the cradle and shows it live in 3D, with specification and enquiry.

  • One sheetstable yet flexible
  • Slightly undersizedalmost invisible under the book
  • Two lipsdiscreet, they carry the book covers

KLIO Book Cradle

A custom-made book support made from a single sheet of metal, bent to the dimensions of your book. Due to the manufacturing process with a slight underdimension, it is virtually invisible.

You specify the book height, the book cover width, the book thicknesses on the left and right sides, and the opening angle. The configurator calculates the weight based on these parameters and displays them live in 3D, with specifications and requests. You can also plan a print run for flatware here.

Configure a book cradle: how it works.

The configurator starts from the book. You measure what you can measure on the object and see every setting at once in the 3D preview.

  1. Product

    Book cradle for open books, or an angled support for flat objects such as prints, letters and documents.

  2. Book

    Book height 100–400 mm, cover width 70–300 mm, text block thickness left and right, spine width. A6, A5 and A4 as presets.

  3. Cradle

    Opening angle 90–180°, length and height of the lip, tilt at the locking joint in steps from 5° to 67.5°.

  4. Staff and sleeve

    10 mm staff, 60–300 mm long, in the BASE sleeve of the KLIO Mount System.

  5. Surface

    Brushed stainless steel or powder-coated in black RAL 9005, anthracite RAL 7016 or white RAL 9016.

  6. Specification and request

    All dimensions, bend angles and the article number at a glance; the request takes only a few details.

Up to four pieces, a set-up and transport share is added. From five pieces it does not apply.

A book cradle from one sheet.

Laser-cut and bent

The cradle is laser-cut flat from 1 mm sheet metal and bent along perforated lines, without any additional part. A mounting strip with two countersunk holes connects it to the locking joint.

If a book is not opened in the middle, one half of the book is thicker than the other. In that case the configurator adds a third bend line and tilts the spine of the cradle accordingly.

Support for flat objects

A sheet from 60 to 450 mm, A6 to A3 or custom size, optionally with a lip at the bottom.

KLIO support for flat objects: A4 sheet with letter and lip, free-standing, 3D preview KLIO support for flat objects from the side: bent-out stand behind the sheet, 28° tilt, 3D preview
Support for flat objects, A4 portrait, free-standing on its stand
KLIO book cradle with an open book on ratchet joint and staff, 3D preview from the configurator KLIO book cradle without a book: bent sheet with lips on ratchet joint and staff, 3D preview
3D preview from the configurator, with and without a book

From calculated proposal to finished cradle.

Every book opens differently. The book cradle from the configurator is therefore a calculated proposal, which we adjust after a test and a sample fitting on a dummy of your book made specially in our workshop.

With your enquiry, send us a photo of your open book, taken from the bottom edge. You will receive the checked quote within two working days. The book cradle is part of the KLIO Mount System: it uses the same sleeve and the same rod as the object mounts.

For long-term displays, and especially at steeper tilt angles, we recommend strapping the book to museum board with PE film strips and inserting a spacer strip of museum board between the text block and the lips of the book cradle.

Laser-cut flat blank: three perforated bend lines, two lips at the bottom, two holes for the screws in the mounting strip.
Delivered to you bent in the order 3, 1, 2: the cradle follows a book that is thicker on the left than on the right.

Frequently asked questions about the book cradle.

What is a book cradle?
A book support that holds an open book in the display case at the chosen opening angle. The KLIO book cradle is bent from one metal sheet and calculated from the dimensions of the individual book.
Which measurements do I need from the book?
Book height, cover width when closed, the thickness of the text block left and right at the page shown, and the widest opening angle the book can take. If you leave the spine width empty, the configurator uses left plus right.
What if the book is not opened in the middle?
Then one half of the book is thicker than the other. The configurator tilts the spine of the cradle accordingly and adds a third bend line. Very thin books opened off-centre are flagged as a special case.
What is the book cradle made of?
1 mm sheet metal, either brushed stainless steel or powder-coated in black (RAL 9005), anthracite (RAL 7016) or white (RAL 9016). The screws are stainless steel.
How is the cradle fixed in the display case?
The book cradle sits on a LINK rod with a locking joint, tilting in steps from 5° to 67.5° and held securely in every position. The 10 mm rod either fits into a BASE sleeve in the plinth, like all mounts of the KLIO Mount System, or stands freely as a MONO Mount element with a round base plate.
What does a custom book cradle cost?
We state the price in our quote, within two working days of your request. Up to four pieces, a set-up and transport share is added; from five pieces it does not apply.
Is the configurator’s proposal the finished cradle?
No. It is a calculation based on your measurements. Before production, we test it on a dummy of your book made in our workshop and adjust it accordingly. A photo of the open book from the bottom edge helps with this.
Who is the configurator for?
For museums, libraries, archives, conservators and exhibition designers. KLIO sells to business customers only.

Prefer to talk it through in person?

For unusual formats, heavy volumes or whole exhibitions, we are happy to advise you.

Updating…
  • No products in the basket.